HEIDENHAIN TNC 415 (259 9x0) Service Manual - Manual (Page 108)

SERVICE MANUAL TNC 415B/425
Page 103
Issue: 20.08.95
17.3.4 Output of the Compensation Value List for Multipoint Axis
Error Compensation .KOR
NOTE:
The TNC only displays the external directory in the FE1 mode.
Until NC software 259 93x.07 and 259 94x.07 the compensation values and the axis relations were filed
in one table (file with extension .KOR). This file is stored in the RAM of the TNC and can be read out.
Press Key Function
MOD
1 0 5 2 9 6
ENT
EXT
END
TNC in operating mode PROGRAMMING AND EDITING
Prepare TNC for entry of code number
Enter code number and confirm with ENT
Activate data transfer menu
Press soft key
The file .KOR is stored on the external data medium as
.S
Exit data transfer menu
TNC in operating mode PROGRAMMING AND EDITING