Data input and output, 1 data transfer menu – HEIDENHAIN TNC 415 (259 9x0) Service Manual User Manual
Page 102
SERVICE MANUAL TNC 415B/425
Page 97
Issue: 20.08.95
17. Data Input and Output
17.1 Data Transfer Menu
In the operating mode PROGRAMMING/EDITING (press
), the data transfer menu is activated by
pressing
EXT
.
On the left half of the screen the memory contents of the TNC is displayed; on the right half the memory
contents of the peripheral unit.
The memory contents of the peripheral unit is only displayed automatically in the interface mode FE1. In all
other operating modes it can be loaded by means of the soft key
.
To switch between the screen halves press the arrow keys
and
.
By switching the screen half the direction of data transfer is changed.
This manual is related to the following products: