Westermo GDW-11 - Manual (Page 98)

98 Short Messages commands 6615-2220
+CMGW – Write Message to Memory
Description:
This command stores a message in memory (either SMS-SUBMIT or SMS-DELIVERS).
The memory location is returned (no choice possible as with phonebooks
+CPBW).
Text or PDU is entered as described for the Send Message +CMGS command.
Syntax text mode:
( is returned in both cases)
AT+CMGW= [, [, ] ]
enter text
Syntax in PDU mode:
AT+CMGW= [,]
give PDU
Parameters:
Originating or Destination Address Value in string format.
Type of Originating / Destination Address
Text mode PDU mode
“REC UNREAD” 0
“REC READ” 1
“STO UNSENT” 2
“STO SENT” 3
NOTE:
Integer type in PDU mode (default 2 for +CMGW), or string type in text mode (default
“STO UNSENT” for +CMGW). Indicates the status of message in memory. If is
omitted, the stored message is considered as a message to send.
Length of the actual data unit in bytes