Westermo GDW-11 - Manual (Page 198)

198 Specific AT commands 6615-2220
+WCPI – CPHS information
Description:
This indication provide CPHS information; i.e. which data field are present in the SIM. This
command is the response to the AT+CPHS 2,6[,] command.
Syntax:
AT+CPHS=2,6[,]
Response syntax:
+WCPI: ,
Parameters:
value indicating the field of CPHS information
If field omitted in the AT+CPHS command, all field of CPHS Info will be dis-
played.
0: data field is set
1: data field is unset
When all CPHS information are requested, the status correspond to a bit field
NOTE:
The field CSP service ( = 1) is used to set or not the CSP feature at the ini-
tialization.
Command example Possible responses Note
AT+CPHS=2,6 +WCPI: 0,”0033000F” Get the current status for
OK all CPHS info field
AT+CPHS=2,6,13 +WCPI: 13,1 Get the current status for
OK Call Forward Activated
indicator for Line 1.
AT+CPHS=2,6,22 +WCPI: 22,0 Get the current status for
OK Line 2 Mailbox number.
Mailbox number for Line 2
is not available.
AT+CPHS=2,6,17 +CME ERROR: 3 Wrong data field
AT+CPHS=2,6,22 +CME ERROR: 3 Get the current status for
Line 2 Mailbox number.
CPHS Feature is not
allowed
AT+CPHS=0,6 OK Deactivation of CPHS Info
feature.
No effect.