Westermo GDW-11 - Manual (Page 213)

GPRS commands 213 6615-2220
GPRS commands
+CGDCONT – Define PDP Context
Description:
This command specifies PDP context parameter values for a PDP context identified by
the local context identification parameter, .
Four PDP contexts can be defined through WESTERMO software.
A special form of the set command, +CGDCONT= causes the values for context
number to become undefined.
The test command returns values supported as a compound value. If the MT supports
several PDP types, , the parameter value ranges for each are
returned on a separate line.
The read command returns the current settings for each defined context.
The test command returns values supported as a compound value. If the MT supports
several PDP types, are
returned on a separate line.
Syntax:
AT+CGDCONT=[ [, [, [, [, [,comp>]]]]]]
Response Syntax:
AT+CGDCONT?
+CGDCONT: , , ,, ,
[+CGDCONT: , , ,, ,
[...]]
AT+CGDCONT=?
+CGDCONT: (range of supported s), ,,,(list of supported s),
(list of supported s)
[+CGDCONT: (range of supported s), ,,,(list of supported comp>s),(list of supported s)
[...]]