Westermo GDW-11 - Manual (Page 261)

TCP SOCKET AUTOCONNECT Commands 261 6615-2220
*WGPRSAPN – GPRS APN for TCP Socket autoconnect
Description:
Defines the Access Point Name needed to set up a GPRS connection. The APN is a
parameter from the network provider that defines the GPRS access type, (eg. fixed or
dynamic IP address allocation, private or public IP address)
Syntax:
AT*WGPRSAPN=<”apn_string”>
Parameters:
An alphanumeric ASCII text string specifying the APN for the GPRS service. String can be
max 30 characters long.
Command example Possible responses Note
AT*WGPRSAPN=” OK Set command with APN
static.vodafone.net” string.
AT*WGPRSAPN? *WGPRSAPN: Current value
“static.vodafone.net”
AT*WGPRSAPN=? *WGPRSAPN: (“APN”) Test command
*WGPRSUN – GPRS Username for TCP Socket autoconnect
Description:
Defines the username needed to set up a GPRS connection. The username is a param-
eter from the network provider that is needed together with the APN and the password
for a successful GPRS connection. Depending on GPRS access type, the username and
password may not be needed, check with the GPRS service provider for more informa-
tion.
Syntax:
AT*WGPRSUN =<”username”>
Parameters:
An alphanumeric ASCII text string specifying the username for the GPRS service. String
can be up to 30 characters long.
Command example Possible responses Note
AT*WGPRSUN=”USER_1” OK Set command with user-
name
AT*WGPRSUN? *WGPRSUN: “USER_1” Current value
AT*WGPRSUN=? *WGPRSUN: (“username”) Test command