Westermo GDW-11 - Manual (Page 278)

278 SIM TOOLKIT COMMANDS 6615-2220
NOTE:
Some bits are related to the product only and not to the customer application. The
product automatically sets these bits to either 0 or 1 whatever the user enters with the
+STSF command.
Each facility is coded on 1 bit:
… bit = 1: facility is supported by the customer application.
… bit = 0: facility is not supported by the customer application.
Only the first five bytes of the TERMINAL PROFILE (Class 2) can be configured, the
other are set to 0.
Command example Possible responses Note
AT+CMEE=1 OK Enable the reporting of
mobile equipment errors
AT+WIND=15 OK Set indications
AT+CPAS +CPAS: 0 Query ME Status
OK ME is ready.
AT+STSF=? +STSF: (0-2), Test command SIM ToolKit
(160060C01F – 5FFFFFFF7F), Set Facilities
(1-255)
OK
AT+STSF? +STSF: 0,”160060C000”,3 No activation of SIM
OK ToolKit functionality
AT+STSF=2,”5FFFFFFF7F” OK Set all SIM ToolKit facilities
(class 3).
AT+STSF=3 +CME ERROR: 3 Syntax Error
AT+STSF=1 OK Activation of SIM ToolKit
functionality
AT+CFUN=1 OK Reboot Software.
AT+CPIN? +CPIN: SIM PIN Is the ME requiring a
password?
Yes, SIM PIN required
AT+CPIN=0000 OK PIN Ok
+WIND: 4 Init phase is complete
AT+STSF? +STSF: 1,”5FFFFFFF7F”,3 SIM ToolKit functionality
OK activated with all facilities