Westermo GDW-11 - Manual (Page 202)

202 Specific AT commands 6615-2220
+WOPEN – Open AT control command
Description:
This command allows to start, stop, delete and get information about the current Open
AT embedded application.
Note: This command is only available if the Open AT feature is enabled (see +WCFM
command).
Syntax:
AT+WOPEN=
Response syntax:
+WOPEN: [,[,]]
Parameters:
0: Stop the Open-AT embedded application. If the product was running, it resets.
1: Start the Open-AT embedded application. If the product was stopped, it resets.
2: Get the Open AT library versions.
3: Erase the objects flash of the Open-AT embedded application.
4: Erase the Open-AT embedded application.
5: Suspend (in WESTERMO software kernel) the Open AT embedded application tasks.
NOTE:
Mode = 3 and 4 are only available if Open-AT embedded application is stopped
(AT+WOPEN=0).
Open AT embedded applications can be resumed with AT+WOPENRES command or the
INTERRUPT feature (see +WCFM command).
ASCII string giving the internal Open AT library version.
ASCII string giving the external Open AT library version.
NOTE:
If no embedded application is loaded, the parameter does not appear.