Westermo GDW-11 - Manual (Page 188)

188 Specific AT commands 6615-2220
+WSSW – Software version
Description:
This command displays some internal software reference.
Syntax:
AT+WSSW
Parameters:
No parameter
Command example Possible responses Note
AT+WSSW A00_00gm.2c Get Software version
000000008F5DC6EA
OK
AT+WSSW=? OK
AT*WRECALL – Recall Settings
Description:
This command recalls saved settings just as after power off/on reboot. The recall com-
mand is valid for the following commands:
*WGPRSAPN, *WGPRSUN, *WGPRSPW, *WTCPCONNECT, *WTCPI, *WPIN,
*WTCPPORT, *WTCPTXDELAY, *WTCPSERV, *WTCPMODE, *WTCPDLEMODE.
Syntax:
AT*WRECALL
Command example Possible responses Note
AT*WTCPPORT? AT*WTCPPORT: 9000
OK Current value (not saved)
AT*WRECALL OK Restore saved value.
AT*WTCPPORT? AT*WTCPPORT: 7232
OK Saved value