Westermo GDW-11 - Manual (Page 273)

TCP SOCKET AUTOCONNECT Commands 273 6615-2220
AT#D – Dial to IP address
Description:
This command configures a GPRS/TCP link according to the “AT*WGPRSxxx” and
“AT*WTCPxxx” parameters.
The unit will be configured as an TCP client and try to establish a TCP link to the remote
entity IP address and port number as described in the command string.
Disconnection can be done with the escape sequence <+++> and the hang-up command
“ATH”.
Syntax:
AT#D :
Parameters:
Destination IP address
Port number of the remote entity
Command example Possible responses Note
AT#D192.168.0.5:9000 CONNECT A TCP link is set up to
remote entity
+++ OK Escape sequence
ATH NO CARRIER Disconnection