Westermo GDW-11 - Manual (Page 203)

Specific AT commands 203 6615-2220
Command example Possible responses Note
AT+WOPEN=? +WOPEN: (0-5)
OK
AT+WOPEN? +WOPEN: 0
OK
AT+WOPEN=2 +WOPEN: 2, “AT Get the Open-AT library
v2.00”, “AT v2.00” versions.
OK
AT+WOPEN=3 OK The objects flash are
erased
AT+WOPEN=1 OK Start the embedded
+WIND: 3 application.
Product reset in order to
start the embedded
application.
AT+WOPEN = 3 +CME ERROR: 532 The embedded application
is activated so the objects
flash are not erased.
AT+WOPEN = 4 +CME ERROR: 532 The embedded application
is activated so it cannot be
erased
AT+WOPEN=0 OK Stop the embedded
+WIND: 3 application.
Product reset in order to
stop the embedded
application.
AT+WOPEN=3 OK The objects flash are
erased
AT+WOPEN=4 OK The embedded application
is erased
AT+WOPEN? +CME ERROR: 3 The Open AT feature is
disabled.
AT+WOPEN=5 OK Suspend Open AT tasks
AT+WOPEN? +WOPEN:5
OK