Westermo GDW-11 - Manual (Page 15)

General commands 15 6615-2220
+CCLK – Clock Management
Description:
This command is used to set or get the current date and time of the ME real-time clock.
Default date/time is “00/01/01,00:00:00” (January 1st, 2000 / midnight).
NOTE:
The ME realtime clock does not have any battery backup, a ME power down means that
the real time clock will be stopped.
Syntax:
AT+CCLK=
Parameters:
is a string with the following format: “yy/MM/dd,hh:mm:ss”
Valid years are 00 (for 2000) to 99 (for 2099).
The seconds field is not mandatory.
Command example Possible responses Note
AT+CCLK=”00/06/09, OK Set date to June 9th, 2000,
17:33:00” and time to 5:33pm
AT+CCLK=”00/13/13, +CME ERROR 3 Incorrect month entered
12:00:00”
AT+CCLK? +CCLK: “00/06/09, 17:34:23” Current date is June 9th,
OK 2000, time is also reported