Westermo GDW-11 - Manual (Page 270)

270 TCP SOCKET AUTOCONNECT Commands 6615-2220
AT*WCMEE – Error result codes CME: on *Wxxx and standard
commands
Description:
This command controls if extended result codes CME: xxx should be send out if extend-
ed result codes are wanted on the *Wxxx and standard commands.
Example of some unsoliced result codes that are controlled by this command:
+WIND, +CREG, +CGREG, +CGEREP and *Wxxx result codes
Syntax:
AT*WCMEE=
Parameters:
0: Disable (default)
1: Enable
Command example Possible responses Note
AT*WCMEE=1 OK Enable extended error
codes
AT*WCMEE? *WCMEE: 1 Show current value
OK