Westermo GDW-11 - Manual (Page 152)

152 Fax commands 6615-2220
+FBOR – Page transfer bit order
Description:
This command sets the bit order for negotiation and fax page transfer. The order is
related to the bit order on radio link.
Syntax:
AT+FBOR=
Parameters:
Bit order for negotiation Bit order for page transfer
0(default) Same Same
1 Same Reverse
2 Reverse Same
3 Reverse Reverse
Command example Possible responses Note
AT+FBOR=? (0–3) Test command
OK
+FBUF – Buffer size report
Description:
This command requests the size of the exchange buffer between the modem and the fax
application.
NOTE:
Only the read command is supported.
Syntax:
AT+FBUF
Parameters:
No parameter
Command example Possible responses Note
AT+FBUF? 1024 Current value
OK