Westermo GDW-11 - Manual (Page 206)

206 Specific AT commands 6615-2220
Parameter Type
MCC-MNC 3 bytes
LAC 2 bytes
CI 2 bytes
Network measurement 16 bytes
BCCH channel list Maximum 48 bytes (if version V0 of GSM Rec 11.14-800 )
Or 129 bytes (if version V1 of GSM Rec 11.14-800). The
version number in indicated in TERMINAL PROFILE infor-
mation in EEPROM. It is not user-customizable. It is config-
ured at production-time.
Timing Advance 1 byte
Date and Time 7 bytes: Date, time and time zone at STLK Format
For mode = 3:
(Optional parameter)
Range: [1-255] (at least 1 bit set to 1).
-if bit 0 set to 1 (value 1):
DaT will be returned in the response
-if bit 1 set to 1 (value 2): TA will be returned in the response
-if bit 2 set to 1 (value 4): BCCH will be returned in the response
-if bit 3 set to 1 (value 8): NetMeas will be returned in the response
-if bit 4 set to 1 (value 16): CI will be returned in the response
-if bit 5 set to 1 (value 32): LAC will be returned in the response
-if bit 6 set to 1 (value 64): MNC-MCC will be returned in the response
NOTE:
… After having downloaded the EEPROM configuration: default value of
is 0xFF (all information returned).
… The value set with the command “at+wloc= 3,xx” is saved in EEPROM,
so it will be taken into account after an Init.
… See Appendix C for details on BCCH channel list.
Command example Possible responses Note
AT+WLOC=0 OK Stops the display of local
information
AT+WLOC=3,255 OK Set the wished information
to display (255 -> com-
plete information)
AT+WLOC=1 +WLOC: 02f802,0006, Displays once the local
7772, f13101b04cf51278 information
91138e95a846d160,
8b49d08d0797c419e
272e10889a000009302
170399020403c1020a03c
5020a03, 00,010121111349ff
OK
AT+WLOC=2,6 +CME ERROR:3 6 is not a multiple of 5