Westermo GDW-11 - Manual (Page 81)

Phonebook commands 81 6615-2220
+WPGS – Settings of a group
Description:
This command sets parameters of a group.
Syntax:
AT+WPGS=,[,]
Parameters:
0: Read group settings
1: Write group settings
Index of a group
Parameter is optional if =0. It is mandatory if =1.
0: All Refused – incoming call is forwarded to the voice mailbox.
1: All Accepted – incoming call is received (RING message is displayed)
Command example Possible responses Note
AT+WPGS=1,1,1 OK set restrict call to “All
Accepted”
AT+WPGS=0,1 +WPGS:1 Command reads group 1
OK settings
AT+WPGS=? +WPGS: (0-1),(1-10),(0-1) Test command
OK