Westermo GDW-11 - Manual (Page 290)

290 SIM TOOLKIT COMMANDS 6615-2220
Parameters when CmdType=0 (Select an item from the main menu)
1: Item selected by the user.
2: Help information required by user.
Contains the item identifier of the item selected by the user.
Parameters when CmdType=1 (Confirm the display text clearing)
No values.
Parameters when CmdType=2 (Get Inkey)
0: Session ended by user.
1: Response given by the user.
2: Help information required by user.
Contains the key pressed by the user.
Parameters when CmdType=3 (Get Input)
0: Session ended by user.
1: Response given by the user.
2: Help information required by user.
Contains the string of characters entered by the user.
NOTE:
For Inputs in UCS2 format, the data are entered in ASCII format. Example: For
“8000410042FFFF” entered, the SIM receives 0x00 0x41 0x00 0x42 with UCS2 DCS.
(See the Appendix E about the different UCS2 syntaxes).
Parameters when CmdType=4 (Setup call)
0: User refuses the call.
1: User accepts call.
Paramters when CmdType=6 (Select Item)
0: Session terminated by the user
1: Item selected by the user
2: Help information required by the user
3: Return to the back item
Contains the item identifier selected by the user