Westermo GDW-11 User Manual
Page 135
Data commands 135
6615-2220
Parameters:
0 (default):
Autobauding (modem type: none)
1:
300 bit/s (modem type: V.21)
2:
1200 bit/s (modem type: V.22)
3:
1200/75 bit/s (modem type: V.23)
4:
2400 bit/s (modem type: V.22bis)
5:
2400 bit/s (modem type: V.26ter)
6:
4800 bit/s (modem type: V.32)
7:
9600 bit/s (modem type: V.32)
8: Reserved
12:
9600 bit/s (modem type: V.34)
14(*):
14400 bit/s (modem type: V.34)
65:
300 bit/s (modem type: V.110)
66:
1200 bit/s (modem type: V.110)
68:
2400 bit/s (modem type: V.110)
70:
4800 bit/s (modem type: V.110)
71:
9600 bit/s (modem type: V.110)
75(*):
14400 bit/s (modem type: V.110)
(*)This speed configures data and fax 14.4 kbit/s bearers.
No data compression is provided and only asynchronous modem is supported:
= 0.
Connection element
0: Transparent
only
1(default):
Non transparent only
2: Transparent
preferred
3:
Non transparent preferred
Command example
Possible responses
Note
AT+CBST=?
+CBST: (0-8,65,66,68,70,71),
Test command
(0),(0-3)
Data 14,4 kbit/s not
OK supported
AT+CBST=?
+CBST: (0-8,12,14,65,66,68,
Test command
70,71,75),(0),(0-3)
Data 14,4 kbit/s supported
OK
AT+CBST=7,0,1 OK
Configure
a
bearer
AT+CBST?
+CBST:7,0,1
Current values
OK
AT+CBST=81,0,0
+CME ERROR: 4
Bearer not supported