Westermo GDW-11 - Manual (Page 197)

Specific AT commands 197 6615-2220
+WNON – network operator name
Description:
This indication provides the name of the network operator (as a character string). This
command is the response to the AT+CPHS 2,5[,] command.
Syntax:
AT+CPHS=2,5[,]
Response syntax:
+WNON:,
Parameters:
0: Long format operator name
1: Short format operator name (default value)
The name of the operator, in long or short format
Command example Possible responses Note
AT+CPHS=2,5 +WNON: 0,”Orange F” Get the operator name
OK
AT+CPHS=2,5,1 +WNON: 1,”Orange” Get the short format
OK operator name.
AT+CPHS=2,5,0 +CME ERROR: 3 When CPHS Feature is not
allowed or format name no
accessible
AT+CPHS=2,5,1 +CME ERROR: 3 When NON Feature is not
allowed or format name no
accessible
AT+CPHS=0,5 OK Deactivation of Network
Operator Name feature.