Westermo GDW-11 - Manual (Page 93)

Short Messages commands 93 6615-2220
+CMGR – Read message
Description:
This command allows the application to read stored messages. The messages are read
from the memory selected by +CPMS command.
Syntax.
AT+CMGR=
Response syntax for text mode:
for SMS-DELIVER only
+CMGR:,[,], [,,, , , , ,
]
for SMS-SUBMIT only
+CMGR: ,[,] [,, , , , [], , ,
]
for SMS-STATUS-REPORT only
+CMGR: ,,[,][,],,
Response syntax for PDU mode:
+CMGR: [,] ,
Parameters:
See table in beginning of section “short messages commands”
NOTE:
A message read with status “REC UNREAD” will be updated in memory with the status
“REC READ”.
The parameter for SMS Status Reports is always “READ”.