Fdcc – dce capabilities parameters, Flid – local id string – Westermo GDW-11 User Manual
Page 156
156 Fax commands
6615-2220
+FDCC – DCE capabilities parameters
Description:
This command allows the DTE to parameter the capabilities used for any session.
Syntax:
AT+FDCC=
,
Parameters:
The parameters and default values are the same as for the +FDIS command (see.
Command example
Possible responses
Note
AT+ FDCC=?
(0,1),(0-5),(0-2),(0-2),(0-3),
Test command
(0-2),(0),(0-7)
Fax
ECM
supported,
OK
Fax 14,4 kbit/s supported
AT+ FDCC=?
(0,1),(0-5),(0-2),(0-2),(0-3),
Test command
(0),(0),(0-7)
Fax ECM not supported,
OK
Fax 14,4 kbit/s supported
AT+ FDCC=?
(0,1),(0-3),(0-2),(0-2),(0-3),
Test command
(0-2),(0),(0-7)
Fax
ECM
supported,
OK
Fax 14,4 kbit/s not
supported
AT+ FDCC=?
(0,1),(0-3),(0-2),(0-2),(0-3),
Test command
(0),(0),(0-7)
Fax ECM not supported,
OK
Fax 14,4 kbit/s not
supported
+FLID – Local ID string
Description:
This command allows the local ID string to be defined.
Syntax:
AT+FLID=”
Parameters:
The string has a limited size of 20 characters, and accepts any characters between 32 and
127 as ASCII codes..
Command example
Possible responses
Note
AT+FLID=? (20),(32-127)
Test
command
OK