Westermo GDW-11 - Manual (Page 262)

262 TCP SOCKET AUTOCONNECT Commands 6615-2220
*WGPRSPW – GPRS Password for TCP Socket autoconnect
Description:
Defines the password needed to set up a GPRS connection. The password is a parameter
from the network provider that is needed together with the APN and the username for
a successful GPRS connection. Depending on GPRS access type, the username and pass-
word may not be needed, check with the GPRS service provider for more information.
Syntax:
AT*WGPRSPW =<”password”>
Parameters:
An alphanumeric ASCII text string specifying the password for the GPRS service. String
can be up to 30 characters long
Command example Possible responses Note
AT*WGPRSPW=”USER_1” OK Set command with pass-
word.
AT*WGPRSPW? *WGPRSUN: “USER_1” Current value
AT*WGPRSPW=? *WGPRSUN: (“password”) Test command