Westermo GDW-11 - Manual (Page 154)

154 Fax commands 6615-2220
+FDIS – Current sessions parameters
Description:
This command allows the DTE to parameter the capabilities used for the current
session.
Syntax:
AT+FDIS=,
,,,,,,
Parameters:
This command accepts eight numeric parameters (of the T30 standard).
Vertical Resolution,
0: Normal: 98 lpi (default value)
1: Fine: 196 lpi
Bit Rate
0: 2400 bit/s (modem type V.27 ter)
1: 4800 bit/s (modem type V.27 ter)
2: 7200 bit/s (modem type V.29)
3: 9600 bit/s (modem type V.29, V.17).
Default value if 14.4 kbit/s data feature is not supported.
4(*): 12000 bit/s (modem type V.33, V.17)
5(*): 14400 bit/s (modem type V.33, V.17).
Default value if 14,4 kbit/s data feature is supported.
(*) Only when product supports 14,4 kbit/s data feature
Page Width
0: 1728 pixels in 215 mm (default value)
1: 2048 pixels in 255 mm
2: 2432 pixels in 303 mm
Page Length
0: A4, 297 mm
1: B4, 364 mm
2: Unlimited (default value)