Westermo GDW-11 - Manual (Page 158)

158 Fax commands 6615-2220
Fax Class 2 indication messages
The following messages are used to indicate DCE Responses. They are used in commu-
nication only.
+FCON:
This response indicates connection with a fax machine.
+FDCS ,
,,,,,,
This response reports current session capabilities. The parameters are the same than
those of AT+FDIS command (see 0).
+FDIS ,
,,,,,,
This response reports remote capabilities. The parameters are the same than those of
AT+FDIS command (see 0).
Combinations of the following values are also allowed.
Coding
0x01: R8 x 7.7 l/mm, Fine (196 lpi)
0x02: R8 x 15.4 l/mm
0x04: R16 x 15.4 l/mm
0x08: 200 dpi x 100 l/25.4 mm
0x10: 200 dpi x 200 l/25.4 mm
0x20: 200 dpi x 400 l/25.4 mm
0x40: 300 dpi x 300 l/25.4 mm
+FCFR:
This response indicates confirmation to receive.
+FTSI “”:
This response reports the received transmit station ID string.
+FCSI “”:
This response reports the received called station ID string.
+FPTS
This response reports received page transfer status. The parameter is the same than the
one of AT+FPTS command (see 0).
+FET
This response reports post page message response. The parameter is the same than the
one of AT+FET command (see 0).