Westermo GDW-11 - Manual (Page 171)

V.24-V.25 commands 171 6615-2220
I – Request identification information
Description:
This command causes the product to transmit one or more lines of specific information text.
Syntax:
ATI
Parameters:
0: Display manufacturer followed by model identification. (equivalent to +CGMI and
+CGMM, refer to these commands for more precisions).
3: Display revision identification (equivalent to +CGMR).
4: Display modem configuration in RAM (equivalent to &V0).
5: Display modem configuration in EEPROM (equivalent to &V1).
6: Display modem data features. Lists the supported data rates, data modes, and fax
classes.
7: Display modem voice features.
9: Display revision identification
Other values: “OK” string is sent back.
Command example Possible responses Note
ATI0 WESTERMO MODEM Manufacturer and model
900P identifications
OK
ATI3 440_09gm.Q2406A Revision identification
1266500 020503 17:06 Software release 4.40,
OK generated on the 05th of
February 2003
ATI6 DATA RATES: Modem data features
AUTOBAUD,300,1200,
1200/75,2400,4800,9600,14400
DATA
MODES: T/NT,
ASYNCHRONOUS
FAX CLASS 1,2
OK
ATI7 SPEECH CODINGS: Modem voice features
FR,EFR,HR,AMR
OK
ATI8 Switch1: 0000 Switch settings for
GDW-11
ATI8 Switch1: 0000 Switch settings for
Switch2: 00000000 GDW-12
Switch3: 00000000
ATI9 4100-xxxx Westermo SW release