Creg – network registration – Westermo GDW-11 User Manual
Page 37
Network service commands 37
6615-2220
+CREG – Network registration
Description:
This command is used by the application to ascertain the registration status of the prod-
uct.
Syntax:
AT+CREG=
Response Syntax
+CREG :
Parameters:
0:
Disable network registration unsolicited result code (default)
1:
Enable network registration code result code +CREG :
2:
Enable network registration and location information unsolicited result code
+CREG:
0:
not registered, ME is not currently searching for a new operator.
1:
registered, home network.
2:
not registered, ME currently searching for a new operator to register to.
3: registration
denied.
4: unknown.
5: registered,
roaming.
string type; two byte location area code in hexadecimal format (e.g. “00C3” equals 195 in
decimal).
string type; two byte cell ID in hexadecimal format.