Westermo GDW-11 - Manual (Page 286)

286 SIM TOOLKIT COMMANDS 6615-2220
Parameters when CmdType=7 (Refresh)
0: SlM initialization and full file change notification.
1: File change notification.
2: SIM initialization and file change notification.
3: SIM initialization.
4: SIM reset.
Parameters when CmdType=8 (Send SS)
Text information in ASCII format.
Parameters when CmdType=9 (Send SMS)
Text information in ASCII format.
Parameters when CmdType=10 (Send USSD)
Text information in ASCII format.
Parameters when CmdType=11 (Setup Event List)
1: Reporting asked for an ‘Idle Screen’ event.
2: Reporting asked for an ‘User Activity’ event.
3: Reporting asked for ‘Idle Screen’ and ‘User Activity’ events.
4: Cancellation of reporting event.
NOTE:
For the UCS2 format texts are displayed in Hexa ASCII format. Example: When the SIM
sends a TextString containing 0x00 0x41 the text displayed is “0041”.
Error codes:
+CME ERROR: 3 Operation not allowed. This error is returned when a wrong
parameter is detected.
+CME ERROR: 4 Operation not supported. This error is returned when the user
wants to get information about a SIM ToolKit pro-active command (with SIM ToolKit
functionality not activated.)
+CME ERROR: 518 SIM ToolKit indication not received. This error is returned when
the SIM Toolkit indication (+STIN) has not been received.