Westermo GDW-11 - Manual (Page 92)

92 Short Messages commands 6615-2220
2: New CBMs are routed directly to the TE using unsolicited result code.
If PDU mode: +CBM: or
If text mode: +CBM:,,,,
3: Class 3 CBMs: as =2.
Other classes CBMs: as =1.
For SMS-STATUS-REPORTs. Default is 0.
0: No SMS-STATUS-REPORTs are routed.
1: SMS-STATUS-REPORTs are routed using unsolicited code:
If PDU mode: +CDS: (PDU mode) or
If text mode: +CDS: ,, [] , [], ,
2: SMS-STATUS-REPORTs are stored and routed using the unsolicited result code:
+CDSI: “SR”,
Default is 0.
0: TA buffer of unsolicited result codes defined within this command is flushed to the
TE when = 1 to 3 is entered (OK response shall be given before flushing
the codes)
1: TA buffer of unsolicited result codes defined within this command is cleared when
1. . .3 is entered.
Command example Possible responses Note
AT+CNMI=2,1,0,0,0 OK =1
+CMTI: “SM”,1 Message received
AT+CNMI=2,2,0,0,0 OK =2
+CMT: “123456”,”98/10/01, Message received
12:30 00+00”,129,4,32,240,
“15379”,129,5
AT+CNMI=2,0,0,1,0 OK =1
AT+CMGS=”+33146290 +CMGS: 7 Send a message in text
800” OK mode,
Happy Birthday! Successful transmission
+CDS: 2, 116, ”+33146290800”, Message was correctly
145, “98/10/01,12:30:07+04”, delivered
“98/10/01 12:30:08+04”, 0