Westermo GDW-11 - Manual (Page 82)

82 Short Messages commands 6615-2220
Short Messages commands
Parameters definition
Destination Address, coded like GSM 03.40 TP-DA
Data Coding Scheme, coded like in document [5].
Discharge Time in string format: “yy/MM/dd,hh:mm:ssÍzz”(Year [00-99],
Month [01-12], Day [01-31], Hour, Minute, Second and Time Zone [quarters
of an hour] ). Years range is [2000-2099]
First Byte, coded like SMS-SUBMIT first byte in document [4], default value is
17 for SMS-SUBMIT
Place of storage in memory.
Text mode (+CMGF=1): number of characters
PDU mode (+CMGF=0): length of the TP data unit in bytes
Memory used to list, read and delete messages (+CMGL, +CMGR and
+CMGD).
Memory used to write and send messages (+CMGW, +CMSS).
Preferred memory to which received SMS are to be stored
CBM Message Identifier.
Message Reference.
Originator Address.
Protocol Identifier.
For SMS: GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadeci-
mal format, coded as specified in doc [4] For CBS: GSM 03.41 TPDU in hexa-
decimal format
Recipient Address.
Service Center Address
Service Center Time Stamp in string format: “yy/MM/dd,hh:mm:ssÍzz” (Year/
Month/Day,Hour:Min:SecondsÍTimeZone)
CBM Serial Number
Status of a SMS-STATUS-REPORT
Status of message in memory.
Type-of-Address of .
Type-of-Address of .
Type-of-Address of .
Number of message locations in .
Number of messages locations in
Number of messages locations in .
Total number of messages locations in .
Total number of messages locations in
Total number of messages locations in .
Validity Period of the short message, default value is 167