Westermo GDW-11 - Manual (Page 219)

GPRS commands 219 6615-2220
Numeric parameter which specifies the peak throughput class
0: Subscribed
1:
Up to 1000 (8 kbit/s).
2: Up to 2000 (16 kbit/s).
3: Up to 4000 (32 kbit/s).
4: Up to 8000 (64 kbit/s).
5: Up to 16000 (128 kbit/s).
6: Up to 32000 (256 kbit/s).
7: Up to 64000 (512 kbit/s).
8: Up to 128000 (1024 kbit/s).
9: Up to 256000 (2048 kbit/s).
Numeric parameter which specifies the mean throughput class
0: Subscribed by the Nwk / default if value is omitted
1: 100 (~0.22 bit/s).
2: 200 (~0.44 bit/s).
3: 500 (~1.11 bit/s).
4: 1000 (~2.2 bit/s).
5: 2000 (~4.4 bit/s).
6: 5000 (~11.1 bit/s).
7: 10000 (~22 bit/s).
8: 20000 (~44 bit/s).
9: 50000 (~111 bit/s).
10: 100000 (~0.22 kbit/s).
11: 200000 (~0.44 kbit/s).
12: 500000 (~1.11 kbit/s).
13: 1000000 (~2.2 kbit/s).
14: 2000000 (~4.4 kbit/s).
15: 5000000 (~11.1 kbit/s).
16: 10000000 (~22 kbit/s).
17: 20000000 (~44 kbit/s).
18: 50000000 (~111 kbit/s).
31: Best
effort.
If a value is omitted for a particular class, then it is considered to be unspecified.
Command example Possible responses Note
AT+CGQREQ=1,1,4,5,2,14 OK Configure command
AT+CGQREQ=? +CGQREG:“IP”,(1-3),(1-4), Possible values
(1-5),(1-9),(1-31)
+CGQREQ:“PPP”,(1-3),(1-4),
(1-5),(1-9),(1-31)
OK
AT+CGQREQ? +CGQREQ: 1,1,4,5,2,14 Current values
OK