Westermo GDW-11 - Manual (Page 211)

GPRS commands 211 6615-2220
+WBHV – Modem Behavior Configuration
Description:
This command allows the user to configure the behavior of WESTERMO modem.
If parameter 1 = 0, the command is useful to configure the way the modem responds
on outgoing voice calls:
The modem response may be sent when the call is established (default mode), or when
the audio path is opened.
If parameter1 = 1, the behavior at init is normal, powerless (airplane mode) or low
power consumption. In the powerless case, no calls (even emergency calls) are available.
Syntax:
AT+WBHV = ,
Parameters:
Mode, 0 – 1
0: configure modem response on outgoing voice calls (default value)
modem response sending (with parameter1 = 0)
0: modem response sent on call establishment (default value)
1: modem response sent when audio path is opened
1: configure modem mode
modem init mode (with parameter1 = 1)
0: modem init mode is normal (default value)
1: modem init mode is powerless (airplane mode : start the modem without the stack)
2: modem init mode is low consumption
Parameter1 value Parameter2 value Meaning
0 0 Modem response is sent on
call establishment (default)
0 1 Modem response is sent when
audio path is opened
1 0 Modem normal mode
(default)
1 1 Modem powerless mode
(Airplane Mode)
1 2 Low Consumption mode