Westermo GDW-11 - Manual (Page 172)

172 V.24-V.25 commands 6615-2220
+WMUX – Data / Commands Multiplexing
Description:
This command allows to manage the data / AT commands multiplexing mode. See appen-
dix 19.13 for the Data / Commands multiplexing protocol description.
Syntax:
AT+WMUX=
Parameters:
0: Multiplexing disabled. When the product is online (data communication in progress),
no AT command can be used (default).
1: Multiplexing enabled. Data flows and AT commands are multiplexed while in online
mode (data communication in progress).
Command example Possible responses Note
AT+WMUX? +WMUX: 0 Data / Commands
OK multiplexing disabled.
AT+WMUX=1 OK Enable Data / Commands
multiplexing.