Westermo GDW-11 - Manual (Page 9)

General commands 9 6615-2220
+WPCS – Phonebook Character Set
Description:
This specific command informs the ME which character set is used by the TE for the
phonebooks. The ME can convert each character of entered or displayed strings. This is
used to read or write phonebook entries (parameters ,
Syntax:
AT+WPCS=
Parameters:
“TRANSPARENT” Transparent mode. The strings are displayed and entered as they are
stored in SIM or in ME.
“CUSTOM” User defined character set (see also. +WCCS command).
“HEX” Hexadecimal mode. No character set used; the user can read or
write hexadecimal values.
Command example Possible responses Note
AT+WPCS= OK Command valid
”TRANSPARENT”
AT+WPCS=”CUSTOM” OK Command valid
AT+WPCS=? +WPCS:("TRANSPARENT”, Possible values
”HEX”,”CUSTOM”)
OK
+CIMI – Request IMSI
Description:
This command is used to read and identify the IMSI (International Mobile Subscriber
Identity) of the SIM card. The PIN may need to be entered before reading the IMSI.
Syntax:
AT+CIMI
Parameters:
No parameters
Command example Possible responses Note
AT+CIMI 208200120320598 IMSI value (15 digits),
starting with MCC
(3 digits) / MNC
(2 digits, 3 for PCS 1900)