Westermo GDW-11 - Manual (Page 122)

122 Supplementary Services commands 6615-2220
+COLP – Connected line identification presentation
Description:
This command allows control of the connected line identification presentation supple-
mentary service – useful for call forwarding of the connected line.
Syntax:
AT+COLP=
Response syntax: (after ATD command, before OK or CONNECT )
+COLP: , [ ,, , ]
Parameters:
Parameter sets/shows the result code presentation status in the TA
0: Disable
1: Enable
Parameter shows the subscriber COLP service status in the network
0: COLP not provisioned
1: COLP provisioned
2: Unknown (no network)
Command example Possible responses Note
AT+COLP=1 OK Activate COLP
AT+COLP? +COLP:1,1 Ask for current
OK functionality
COLP is enabled and
provisioned
ATD146290928; +COLP:”0146290928”, Outgoing call
129,,”JOE” (text format)
ATD146290928; +COLP:“0146290800”, Outgoing call
129,1,,”8000204212FFFF” (UCS2 format)
OK
AT+COLP=0 OK Deactivate COLP