Westermo GDW-11 - Manual (Page 55)

Security commands 55 6615-2220
1: Voice (telephony)
2: Data (apply to all bearer services)
4: Fax (facsimile services)
8: Short Message service
7: Equal to all classes (Default value)
Any attempt to combine different classes will result in activation / deactivation / interro-
gation of voice, data and fax.
If is omitted, default value 7 will be used.
Password maximum length is given with the AT+CPWD=? Command.
NOTE
It will not be possible to lock the FDN phonebook if this one is not loaded.
Command example Possible responses Note
AT+CLCK=”SC”,1,1234 OK Enable PIN, PIN was
correct
AT+CLCK? +CLCK:(“PS”,0),(“SC”,0), Read PIN status, PIN is
(“FD”,0),(“PN“,0),(“PU“,0), enabled, no SIM lock, no
(“PP“,0),(“PC“,0) network lock, no informa-
OK tion on Call barring (no
longer supported in GSM
07.07)
AT+CLCK=”SC”,0,5555 +CME ERROR: 16 Disable PIN, PIN was
wrong
AT+CPIN=1234 OK Enter PIN, PIN was good
AT+CLCK=? +CLCK: Request supported facili-
(“PS”,”SC”,”AO”,”OI”,”OX”, ties, Supported facilities
”AI”,”IR”,”AB”,”AC”,”FD”, ”PN”,
”PU”,”PP”,”PC”)
OK
AT+CLCK=”PN”,1,12345678 OK Activate network lock,
Network lock activated
AT+CLCK=”AO”,1,1234,2 OK Activate all outgoing calls
barring for data calls Call
barring is activate
AT+CLCK=”AO”,2 +CLCK : 1,2 Query BAOC status,
OK BAOC activate for data
calls only
AT+CLCK=”SC”,0,0000 +CME ERROR: 521 Disable PIN, PIN deactiva-
tion is forbidden with this
SIM card