Westermo GDW-11 - Manual (Page 44)

44 Network service commands 6615-2220
+CPLS – Selection of Preferred PLMN list
Description:
This command is used to select one PLMN selector with access technology list in the
SIM card that is used by AT +CPOL command.
Syntax:
AT +CPLS=
Parameters:
0: User controlled PLMN selector with access technology EF_PLMNwAct
Note: if this file is not found EF PLMNSel will be selected
1: Operator controlled PLMN selector with access technology EF_OPLMNwAct
2: Home PLMN selector with access technology EF_HPLMNwAct
Command example Possible responses Note
AT +CPLS? +CPLS: 1 EF_OPLMNwAct is selected
OK
AT+CPLS=0 If EF_PLMNwAct is not
present, EF_PLMNsel vvill
be selected
AT +CPLS=1 +CME ERROR: 3 EF_OPLMNwAct is not
present
AT +CPLS=? +CPLS: (0,1,2) The 3 files with Acces
OK technology are present
and can be selected
AT +CPLS=? +CPLS: (0) Only EF_PLMNvvAct or
OK EF_PLMNsel can be
selected