Westermo GDW-11 - Manual (Page 45)

Network service commands 45 6615-2220
+CPOL – Preferred operator list
Description:
This command is used to edit (or update) the SIM preferred list of networks. This list is
read in the SIM file selected by the command AT +CPLS.
Syntax:
AT +CPOL= [< index>][,[,[,,,>]]]
Parameters:
position of the operator record in the sim preferred operator list. Do AT+CPOL=? to
get the maximum index of the selected EF.
0: long alphanumeric format for
1: short alphanumeric format for
2: numeric format for
Characterstring or integer (see
0: GSM access technology not selected
1: GSM access technology selected
0: GSM compact access technology not selected
1: GSM compact access technology selected
0: UTRAN access technology not selected
1: UTRAN access technology selected
The different possibilities are:
… AT+CPOL = to delete an entry.
… AT+CPOL = , to set the format used by the read command (AT+CPOL?).
… AT+CPOL = ,, to put in the next free location.
… AT+CPOL = ,, to write in the at the
.
… AT+CPOL = < index>,,,,,< Utra n _
Act> to write in the at the precising the access technol-
ogy (in the case of EF_PLMNwact, EF_HPLMNwact or EF_OPLMNwact is present).
NOTE: Per default if Acces technology parameters are not given, the GSM access tech-
nology will be choosen.