Westermo GDW-11 - Manual (Page 106)

106 Short Messages commands 6615-2220
+WCBM – Cell Broadcast Message Identifiers
Description:
This specific command is used to read the EF-CBMI SIM file.
NOTE:
The EF-CBMI file is not used with the +CSCB command.
The application should read this file (using AT+WCBM?) and combine the Message
Identifiers with those required by the application.
Syntax:
AT+WCBM=
Parameters:
See table in beginning of section “short messages commands”
Command example Possible responses Note
AT+WCBM= OK Write 4 messages
”10,100,1000,10000” identifiers in EF-CBMI
AT+WCBM? +WCBM=”10,100,1000,100000”
OK
4 CBMIs are stored
in EF-CBMI