Westermo GDW-11 - Manual (Page 280)

280 SIM TOOLKIT COMMANDS 6615-2220
Parameters:
< CmdTreated >
0: The command must be treated by the application.
1: The command is already treated by the modem.
String type; SIM command string in hexadecimal format.
NOTE:
The last SIM toolkit indication sent by the SIM can be requested by the AT+STIN? com-
mand. This command is only usable between the sending of the STIN indication by the
SIM (step 2: see section 16.2) and the response of the user with the +STGI command
(step 3).
Command example Possible responses Note
AT+STIN? +STIN: 0 Ask for the last SIM toolkit
OK indication sent by the SIM
The last SIM toolkit
indication was a Setup
Menu
AT+STGI=0 Display the SIM toolkit
application menu
AT+STIN? +CME ERROR: 4 Ask for the last SIM toolkit
indication sent by the SIM
Operation not supported,
the +STGI command has
been already used