Westermo GDW-11 - Manual (Page 8)

8 General commands 6615-2220
+CSCS – Select TE character set
Description:
This command informs the ME which character set is used by the TE. The ME can con-
vert each character of entered or displayed strings. This is used to send, read or write
short messages. See also +WPCS for the phonebooks’ character sets.
Syntax:
AT+CSCS=
Parameters:
“GSM” GSM default alphabet.
“PCCP437” PC character set code page 437 .
“CUSTOM” User defined character set (see also. +WCCS command).
“HEX” Hexadecimal mode. No character set used ; the user can read or
write hexadecimal values.
Command example Possible responses Note
AT+CSCS=”GSM” OK Command valid
AT+CSCS=”PCCP437” OK Command valid
AT+CSCS=? +CSCS:("GSM”,“PCCP437”, Possible values
“CUSTOM”,“HEX”)
OK