Westermo GDW-11 - Manual (Page 339)

Examples
This chapter gives illustrative examples of the general AT commands used for a com-
munication. The presentation of commands and responses is as close as possible to what
a user can see on its test monitor. Blank lines have been intentionally removed. The
characters on the left margin are DTE generated. Middle column characters are modem
generated.
Examples with the PIN required
Example 1, When the ME has to be powered ON.
Command example Possible responses Note
AT+CMEE=1 OK Enable the report mobile
equipment errors
AT+CREG=1 OK Report registration
AT+CPAS +CPAS: 5 Query ME Status (ME is
OK asleep)
AT+CFUN=1 OK Set ME to full functionality
AT+COPS=0 +CME ERROR: 11 Ask for automatic operator
selection and registration,
SIM PIN required
AT+CPIN=1234 +CME ERROR: 16 User entered a wrong PIN ,
Incorrect password)
AT+CPIN=0000 OK PIN Ok
AT+COPS=0 OK Ask for automatic operator
selection and registration.
+CREG:1 Registered on the network
AT+COPS=3,0 OK Select the long name
alphanumeric format.
AT+COPS? +COPS: 0,0,”I OMNITEL”
OK Get the operator name
Example 2, When the ME has already been powered on.
Command example Possible responses Note
AT+CMEE=1 OK Enable the report mobile
equipment errors
AT+CPAS +CPAS: 0 Get the ME Status , ME is
OK ready to receive commands
AT+CPIN? +CPIN: SIM PIN Is ME requiring a password?
Yes, SIM PIN required
AT+CPIN=0000 OK PIN Ok
Examples 339 6615-2220