Westermo GDW-11 - Manual (Page 143)

Data commands 143 6615-2220
< neg >
Specifies whether or not the DCE should continue to operate if the desired result is not
obtained
0: Do not disconnect if V.42 bis is not negotiated by the remote DCE as specified in
1: Disconnect if V.42 bis is not negotiated by the remote DCE as specified in
< P1>
Specifies the maximum number of dictionary entries that should be negotiated, (default is
2048)
Range 512 to 2048
Specifies the maximum string length to be negotiated, (default is 20).
Range 6 to 250
Command example Possible responses Note
AT+DS=? +DS: (0-3),(0,1), Test command
(512-2048),(6-250)
OK
AT+DS=3,0, 2048,250 OK Set new parameters
AT+DS? +DS: 3,0,2048,250 Current values
OK