Cres – restore settings, Csdh – show text mode parameters – Westermo GDW-11 User Manual
Page 90
90 Short Messages commands
6615-2220
+CRES – Restore settings
Description:
All settings specified in the +CSCA and +CSMP commands are restored from EEPROM if
the SIM card is Phase 1 or from the SIM card if it is a Phase 2 one.
Syntax:
AT+CRES
Command example
Possible responses
Note
AT+CRES OK
Restore +CSCA and
+CSMP parameters
+CSDH – Show text mode parameters
Description:
This command gives additional information on text mode result codes. This information
can be found in description of the +CMT, +CMGR, +CMGL commands and responses.
Syntax:
AT+CSDH=
Parameters:
Show indicator
0:
do not show header values
1:
show the values in result codes
Command example
Possible responses
Note
AT+CSDH=0
OK
Set value to “do not show”
AT+CSDH?
+CSDH: 0
Current value
OK
Do not show header values