Westermo GDW-11 - Manual (Page 148)

148 Fax commands 6615-2220
+FRH – HDLC receive speed
Description:
This command sets the fax receive speed, using the HDLC protocol.
Syntax:
AT+FRH=
Parameters:
3: V.21 channels 300 bit/s.
Command example Possible responses Note
AT+FRH=? +FTH: (3) Test command
OK
+FTS – Stop transmission and wait
Description:
This command stops transmission for the specified period.
Syntax:
AT+FTS=
Parameters:
Silence period (unit is 10 ms).
Command example Possible responses Note
AT+FTS=? (0-255) Test command
OK
AT+FTS=50 OK Stops transmission and
waits for 0.5s