Grandstream UCM6100 User Manual for 1.0.9.25 - Manual (Page 99)

Firmware Version 1.0.9.25 UCM6100 Series IP PBX User Manual Page 98 of 303
is 30.
Sort Results
Specify whether the searching result is sorted or not. The default setting is
No.
Incoming Calls
Configure to enable LDAP number searching when receiving calls. The
default setting is No.
Outgoing Calls
Configure to enable LDAP number searching when making calls. The
default setting is No.
Lookup Display Name
Configures the display name when LDAP looks up the name for incoming
call or outgoing call. It must be a subset of the LDAP Name Attributes.
XML Phonebook
Phonebook XML Server
Select the source of the phonebook XML server.
• Disable
Disable phonebook XML downloading.
• Manual
Once selected, users need specify downloading protocol HTTP,
HTTPS or TFTP and the server path to download the phonebook
XML file. The server path could be IP address or URL, with up to 256
characters.
• Local UCM Server
Once selected, click on the Server Path field to upload the phonebook
XML file. Please note: after uploading the phonebook XML file to the
server, the original file name will be used as the directory name and
the file will be renamed as phonebook.xml under that directory.
Phonebook Download Interval
Configure the phonebook download interval (in Minute). If set to 0,
automatic download will be disabled. Valid range is 5 to 720.
Remove manually-edited
entries on download
If set to "Yes", when XML phonebook is downloaded, the entries added
manually will be automatically removed.
Table 29: Global Policy Parameters: Maintenance
Upgrade and Provision
Firmware Source
Firmware source via ZeroConfig provisionoing could a URL for external
server address, local UCM directory or USB media if plugged in to the
UCM6100.
Select a source to get the firmware file:
• URL
If select to use URL to upgrade, complete the configuration for the
following four parameters: “Upgrade Via”, “Server Path”, “File Prefix”
and “File Postfix”.