beautypg.com

Figure 87: ucm6100 fxo tone settings, Figure 88: ucm6100 pstn detection – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual

Page 150

background image

Firmware Version 1.0.9.25

UCM6100 Series IP PBX User Manual

Page 149 of 303

Figure 87: UCM6100 FXO Tone Settings

4. Click on "Detect" to start PSTN detection.

Figure 88: UCM6100 PSTN Detection

• If there are two FXO ports connected to PSTN lines, use the following settings for auto-detection.

Detect Model: Auto Detect.

Source Channel: The source channel to be detected.

Destination Channel: The channel to help detecting. For example, the second FXO port.

Destination Number: The number to be dialed for detecting. This number must be the actual

PSTN number for the FXO port used as the destination channel.

This manual is related to the following products: