Table 23: create new office time, Figure 50: create new office time – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 84
Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 83 of 303
Web UI->Settings->Time Settings->Office Time. Click on "Create New Office Time" to create an office
time.
Figure 50: Create New Office Time
Table 23: Create New Office Time
Start Time
Configure the start time for office hour.
End Time
Configure the end time for office hour
Week
Select the work days in one week.
Show Advanced Options
Check this options to show advanced options. Once selected, please
specify "Month" and "Day" below.
Month
Select the months for office time.
Day
Select the work days in one month.
Select "Start Time", "End Time" and the day for the "Week" for the office time. The system administrator
can also define month and day of the month as advanced options. Once done, click on "Save" and then
"Apply Change" for the office time to take effect. The office time will be listed in the web page as the figure
shows below.