Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 129

Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 128 of 303
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward No Answer
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
CFN Time Condition
Select time condition for Call Forward No Answer. The available time
condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
CFB Time Condition
Select time condition for Call Forward Busy. The available time condition
are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Ring Simultaneously
Ring Simultaneously
Enable this option to have an external number ring simultaneously along
with the extension. If a register trunk is used for outbound, the register
number will be used to be displayed for the external number as caller ID