Upgrading via local upload, Figure 174: local upgrade – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 289

Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 288 of 303
Firmware File Suffix
If configured, only the firmware with the matching encrypted postfix will be
downloaded and flashed into the UCM6100.
HTTP/HTTPS User Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Please follow the steps below to upgrade the firmware remotely.
• Enter the firmware server path under Web GUI->Maintenance->Upgrade.
• Click on "Save". Then reboot the device to start the upgrading process.
• Please be patient during the upgrading process. Once done, a reboot message will be displayed in the
LCD.
• Manually reboot the UCM6100 when it's appropriate to avoid immediate service interruption. After it
boots up, log in the web GUI to check the firmware version.
UPGRADING VIA LOCAL UPLOAD
If there is no HTTP/TFTP server, users could also upload the firmware to the UCM6100 directly via Web
GUI. Please follow the steps below to upload firmware locally.
• Download the latest UCM6100 firmware file from the following link and save it in your PC.
• Log in the Web GUI as administrator in the PC.
• Go to Web GUI->Maintenance->Upgrade,
upload the firmware file by clicking on
and select
the firmware file from your PC. The default firmware file name is ucm6100fw.bin
Figure 174: Local Upgrade
• Click on
to start upgrading.