Product overview, Feature hightlights, Figure 1: ucm6102/ucm6104/ucm6108/ucm6116 – Grandstream UCM6100 User Manual for 1.0.9.25 User Manual
Page 28

Firmware Version 1.0.9.25
UCM6100 Series IP PBX User Manual
Page 27 of 303
PRODUCT OVERVIEW
FEATURE HIGHTLIGHTS
• 1GHz ARM Cortex A8 application processor, large memory (512MB DDR RAM, 4GB NAND Flash),
and dedicated high performance multi-core DSP array for advanced voice processing.
• Integrated 2/4/8/16 PSTN trunk FXO ports, 2 analog telephone FXS ports with lifeline* capability in
case of power outage, and up to 50 SIP trunk options.
• Gigabit network port(s) with integrated PoE, USB, SD; integrated NAT router with advanced QoS
support (UCM6102 only).
• Supports a wide range of popular voice codes (including G.711 A-law/U-law, G.722, G.723.1, G.726,
G.729A/B, iLBC, GSM), video codec (including H.264, H.263, H.263+), and Fax (T.38).
• Hardware DSP based 128ms-tail-length carrier-grade line echo cancellation (LEC).
• Supports up to 500 SIP endpoint registration, up to 60 concurrent calls and up to 32 conference
attendees.
• Flexible dial plan, call routing, site peering, call recording.
• Automated detection and provisioning of IP phones, video phones, ATA and other endpoints for easy
deployment.
• Hardware encryption accelerator to ensure strongest security protection using SRTP, TLS, and
HTTPS.
Figure 1: UCM6102/UCM6104/UCM6108/UCM6116